18L Stainless Steel Medical Lab Autoclave Steam Autoclave Sterilizers

Specifications: Volume: 18L Whole Size: About 17.7 x 13.8 x 11.2in Power: 110V Output Power: 2.0KW Overpressure Auto-discharging:0.145-0.17Mpa Range Of Measurement: Max. 121°C-129°C Plug: US Plug Material: Stainless Steel Color: Silver Dimensions: 320x280x260mm Package Included: 1x MAIN MACHINE 1x Power Cord 1x English usage manual. Operation: Step 1.Place the machine on a flat surface. Step 2.Open the lid, take out the inner tank of sterilizer (you can see the heating electric tube),add water to the heating tube above 3.5L, you must add enough water in time to avoid burning the electric tube due to lacking of water. Step 3.Put those items need to sterilize into the sterilization room, you should keep gaps between the items. Do not block steam holes of the safety valve, air releasing valve, and finally cover the lid, tighten the screws. Step 4. After the normal operation of the equipment, when the measured temperature reaches 105 °C, open the air releasing valve to discharge cold air inside the sterilizer. When the air releasing valve start going out a little hot steam, close the air releasing valve. Step 5. When the steam pressure reaches 0.142-0.17MPa , the safety valve will start pressure relief work, in order to maintain a certain pressure. Step 6. After sterilization, unplug the power cord. 3 minutes later, open the air releasing valve, when the pressure gauges to zero, open the lid to discharge the remaining air.