Seco-Larm MVE-AN1W1-01Q Enforcer Wireless IR Repeater Kit

Extend the range of remote control across IR transmissions with the Seco-Larm Enforcer Wireless IR Repeater Kit. This signal extension kit greatly increases the range of IR signals between compatible devices, allowing you to remotely operate devices such as audio/visual equipment from further distances. The Wireless IR Repeater Kit improves the performance of IR wireless transmissions and reduces RF interference with frequency hopping technology. Multiple types of IR remotes may communicate with the IR Repeater Kit.Increases the range of wireless IR transmission up to 656ft (200m) line of sightFrequency hopping technology minimizes RF interferenceCompatible with 20~60 kHz IR systemsIR Confirmation LED indicates when IR signals are successfully receivedCompact size for easy mountingInstallation DetailsThe IR Repeater Kit's receiver and transmitter both must be plugged into an AC outlet. Place the transmitter facing the device to be controlled and place the receiver facing outward so it may receive signals from your IR remote. A Blue LED will shine when an IR signal is received.In installations where you want the transmitter and receiver to be hidden, connect the included IR emitter to your receiver and place the emitter in an area to receive signals from your remote. The emitter will forward the signals to the main IR receiver which will send the signals to the IR transmitter and finally to your controlled device.ContentsIR TransmitterIR ReceiverWired IR receiverWired IR emitter(2) 5VDC Power adaptersMounting tape for wired IR receiver(2) Mounting tape for wired IR emitterManualTechnical DetailsManufacturer Part #: MVE-AN1W1-01QUPC: 676544019879Color: BlackLED Indicators: IR ConfirmationOperating Voltage: 5 VDCIR Receiver Frequency: ±35° Off AxisIR Emitter Frequency: 20 to 60 kHzIR Emitter Angle: ±11° Off AxisConnector Type:Power: 1.3mm Coaxial center-pin-positiveWired IR Receiver: 1/8 in (3.5mm) TRS Mini-plugWired IR Emitter: 1/8 in (3.5mm) Mono mini-plugMaximum Extended Range: 656 ft (200m)Operating Humidity: 10~90%Operating Temperature: -4 to 140° F (-20° to 60° C)Power Supply: 5VDC/500mADimensions:Transmitter/Receiver: 1-3/4 in x 1-3/4 in x 1-1/4 in (45 x 45 x 31 mm)Wired IR Receiver: 1-3/16 in x 1/4 in x 3/8 in (20 x 7 x 10 mm)Wired IR Emitter: 5/8 in x 3/8 in x 3/16 in (16 x 10 x 5 mm)Cable Length:Wired IR Receiver: 5 ft (1.5m)Wired IR Emitter: 10 ft (3m)RF Frequency: 915MHzWarranty: 2 Year Limited

• Increases the range of wireless IR transmission up to 656ft (200m) line of sight
• Frequency hopping technology minimizes RF interference
• Compatible with 20~60 kHz IR systems
• IR Confirmation LED indicates when IR signals are successfully received
• Compact size for easy mounting